Vision Fitness E4000 - Manual (Page 13)

E3000
E4000
9
CHOOSING TIME AND STARTING
There are two ways to use the timer: Count-Down Mode or Count-Up
Mode.
COUNT-DOWN MODE
Press the SET TIME button to enter
your workout time. When the time
you choose is showing in the TIME
window, start pedaling. The timer
will begin counting down to zero.
When the workout time is
completed, the console will beep
for 5 seconds, then begin counting-
up if you continue pedaling. To
reset, press and hold the HOLD
TO RESET button.
COUNT-UP MODE
To use the timer in count up mode,
simply start pedaling when ‘0:00’
is flashing on the screen.
TURNING SCREEN DISPLAY OFF
The screen display will go off automatically after 5 minutes of non-use.