Vision Fitness E4000 - Manual (Page 17)

E3100
13
SETTING MPH & KPH
Your E3100 console should be set
to Miles when you receive it. If it is
not set to Miles or if you would
like to change the feedback to
Kilometers do the following steps.
• Take out the batteries.
• Reinsert the batteries – this will
bring you to setup mode which
will last for 30 seconds.
• You will hear a series of beeps
and the model of the product will
appear in the TIME window.
• The option “ML” for MILES or
“KL” for KILOMETERS will also
appear in the TIME window.
• Press the SELECT button to go to
the appropriate distance setting.
• When you have the desired
distance setting, press and hold
the START button until you hear the
beep.