Vizio SR-F1 - Manual (Page 3)

2. Suspending the SR-F1.
Note: The SR-L1 can not be suspended.
Caution
The weight of the SR-F1 is approximately 38kg (83.8 Ib). When suspending this speaker, make sure to install it
after investigating structure of installation places, and confirming that the suspending wires or belts are heavy-
duty to this speaker.
Secure to lock the fixing metals of the suspending wire/bolt to the speaker.
TOA takes no responsibility for any accidents or injuries resulting from the falling of the SR-F1 due to incorrect
installation.
Make sure to perform the general suspending installation of the speaker referring to the
following figures.
Be sure to use each two suspending wires or
belts, and each wire should be fixed the ceiling
reinforcement.
Even in case of oblique installation of the
speaker, be sure to use each two suspending
wires or belts.
In case of coupled installation of speakers verti-
cally, be sure to connect less than two speak-
ers.
Never suspend the speaker with the following figures.
To suspend the speaker
by the ringed one wire.
To suspend the speaker
by one wire from the ceiling.
To vertically suspend coupling
no more than two speakers. To suspend using the
handles of speaker.
Suspending metal.
Fixing metal as accessory of the SR-F1.
32206 Pan Fitting (Aeroquip made)
Procure the following applicable metal at site.
32326 Ring Fitting (Aeroquip made)