Vizio SR-F1 - Manual (Page 4)

Specifications
Enclosure
Speaker
Low frequency
High frequency
Nominal impedance
Sensitivity
Frequency response
Crossover frequency
Power
handling
capacity
Low frequency
High frequency
Input connector
Enclosure material
Weight
Dimensions
Finish
SR-F1 SR-L1
Bass reflex type
One 30cm (12") dia. cone speaker
CD horn (60° horizontal by 40° vertical)
plus compression driver
Low frequency: 8
High frequency: 16
Low frequency: 98dB(1W/1m)
High frequency: 110dB(1W/1m)
70Hz~20kHz at AC-F1's use
1kHz at AC-F1's use
Continuous pink noise: 120W RMS
(Band-limited 50Hz~1kHz)
Continuous program : 360W
Continuous pink noise: 80W RMS
(Band-limited 1kHz~20kHz)
Continuous program : 240W
Two 38cm (15") dia. cone speakers
—
8 x2
96dB (1W/1m)
35Hz~1kHz
125Hz at AC-L1's use
Continuous pink noise: 300W RMS
(Band-limited 40Hz~1kHz)
Continuous program : 900W
—
Cannon EP-4-14
Apiton plywood
38kg (83.8 lb.)
390(W)x619(H)x362(D) mm
15.4(W)x24.4(H)x14.3(D) in.
81kg (178.6 Ib.)
829(W)x629(H)x602(D) mm
32.6(W)x24.8(H)x23.7(D) in.
Enclosure: FRP coating in gray color
Front grill: Black-painted.
Specifications are subject to change without notice.
Accessories: Operating instructions ..................... 1 Warranty card..........................................................1
Characteristic Diagrams
SR-F1 (at AC-F1 electronic control unit's use)
Frequency response (1W/1m, at 300Hz)
Polar response (1W/4m)
Horizontal
Vertical
SR-L1 (at AC-L1 electronic control unit's use)
Frequency response (1W/1m, at 100Hz of crossover IN)
AC-L1 mode
Crossover OUT
Crossover IN
General frequency response (1W/1m, at 300Hz of the SR-F1)
SR-L1+AC-L1, SR-F1+AC-F1 AC-L1: Crossover OUT
TOA Corporation
Printed in Japan
133-01-293-30
(1/3 Octave Pink Noise)