Vuzix iWear AV920 - Manual (Page 5)

iWear ® AV920 Connectivity
The iWear ® AV920 has a single input
mini-jack for line level stereo audio and
either NTSC or PAL video. There is a
second mini-jack for connecting your
personal head phones in the event you
prefer them over the included speakers.
Finally, iWear
® AV920 has a mini USB
connection for charging the battery and
updating the firmware in the device.
Charging
Plug the charging cable into the Battery
Box and the AC adaptor.
LED indicator:
green
- charge OK
red - charge low
flash red - needs charging
amber
- charging
Plugging In
The following are a few examples of
acceptable ways of plugging in your
iWear
® AV920. This will vary from
system to system.
Note on Stereoscopic 3D
iWear
® AV920 is capable of displaying
stereoscopic 3D images in two
different ways. If the content being
viewed is enabled with iWear 3D
control information, iWear
® AV920 will
automatically be set in the proper 3D
mode. If you are viewing interlaced 3D
content without the iWear 3D, 3D can be
enabled via the OSD controls with either
L/R or R/L modes.
iWear ® AV920 User Adjustable
iWear ® AV920 features many user
adjustable design elements to ensure
a comfortable experience. These allow
you to customize iWear
® AV920 for a
perfect fit.
Speaker Adjust
Your iWear ® AV920 includes flexible,
removable speakers. These speakers
are adjustable. Simply grasp the
speaker and flex the stem into place for
maximum comfort.
To remove the speakers, pull them out
along the inside of the temple piece.
Note that the speakers are not designed
to fit in your ears.
4