VocoPro CDG-6000RV - Manual (Page 22)

21
Troubleshooting
Problem Solution
No sound output • Make sure the CDG-6000RV is set to the correct input.
• Make sure the volume is turned up.
• Make sure everything is connected firmly and properly.
• Make sure there are no defective cables.
• Make sure all of your components are turned on.
• Make sure the EFFECT LOOP BARS are in place.
There is music but no microphone vocals. • Make sure the microphone is turned on.
• Make sure the microphone cable is not disconnected or
damaged.
• Make sure the microphone master volume or individual
microphone volume controls are turned up to the proper
level.
The remote control is not working. • The CDG-6000RV power is not on.
• Make sure the batteries are inserted correctly and not out
of power.
• Make sure there is nothing blocking the view between the
remote control and the remote sensor on the front of the
CDG-6000RV.
The recording level is too low. • Make sure that the recording level knob is at an acceptable
position for your recording.