Vinotemp VT-6TEDS - Manual (Page 10)

10
W W W . V I N O T E M P . C O M
PROBLEMS WITH YOUR WINE CELLAR
You can easily solve many common wine cellar problems, saving you
the cost of a possible service call. Try the suggestions below to see if
you can solve the problem before contacting Vinotemp at
[email protected].
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Wine cellar does
not operate
•
Not plugged in
•
Using wrong voltage
•
The circuit breaker tripped or a fuse is blown
Wine cellar is not
cold enough
•
Check the temperature control setting as
external environment may require a higher
setting
•
The door is opened too often
•
The door is not closed completely
•
The door seal does not seal properly
•
The wine cellar does not have the correct
clearances to operate efficiently, safely and
correctly
Light does not
work
•
Call the service center
Vibrations
•
Check to assure that the wine cellar is level
Wine cellar seems
to make too much
noise
•
The wine cellar is not level
•
Check the fans inside and at the back of unit
Door will not close
properly
•
The wine cellar is not level
•
The doors were not properly installed
•
The seal is weak
•
The shelves are out of position
Temperature LED
display is blank
•
Main control board does not work
•
The Power Control Board is not functioning
•
There is some problem with the plug (no
power supply)
Temperature LED
display error
•
Display has suffered too much wear and tear
•
Temperature sensor has been cut off
Buttons are not
functional
•
Temperature controller panel is damaged