Visioneer STROBE 500 - Manual (Page 62)

C ONFIGURING THE O NE T OUCH B UTTONS
55
5. Select the Destination Application and format.
6. Click OK or Apply on the OneTouch Properties window.
T
O SCAN USING
C
ONFIGURE
B
EFORE
S
CAN
1. Load the documents face down with their tops into the scanner.
2. Click the button you set up to use the Configure Before Scan option.
The TWAIN or WIA interface will open. This example shows the
TWAIN Interface.
3. Choose the scan settings, such Black & White, Grayscale, or Color,
Resolution, Brightness and Contrast.
4. Click the Scan button on the TWAIN Interface.
5. Your document will be scanned and sent to the Destination
Application specified in the OneTouch 4.0 Properties window.