Visioneer STROBE 500 - Manual (Page 9)

2 V ISIONEER S TROBE 500 S CANNER U SER ’ S G UIDE
T
HE
V
ISIONEER
S
TROBE
500 S
CANNER
Input tray—Holds a stack of documents in the scanner. Unfolds to
support various paper lengths.
Control panel—Scanning controls.
Power Switch & Scan Settings Dial—Turn the dial to the right to turn
on the scanner power. Numbers 1-6 represent the 6 OneTouch scan
settings.
Status Light—Shows the scanner’s current status.
OneTouch Scanner Buttons—Press the Simplex or Duplex button to
initiate scanning using the scan settings for the current dial number.
Paper Guides—Adjusts to fit document width.
Cover release—Opens the cover on the scanner.
Front Feed tray—Open to feed items through the front of the scanner.
Output tray—Holds documents after being scanned.
Power jack—Connects the power cord to the scanner.
Universal Serial Bus (USB) port—Connects the scanner to the computer.
Input Tray
Output tray
Cover Release
Power Switch
& Scan Settings
Dial
USB port
Power jack
Status light
OneTouch
Scanner Buttons
Control panel
Paper Guides
Front Feed Tray