Victor PL3000 - Manual (Page 6)

6
8. Cost 19. Equal 30. Memory Subtotal / Interest
9. Sell 20. Multiplication 31. Memory Subtraction / Month
10. Margin 21. Sign Change 32. Memory Addition / Payment
11. Tax Rate Preset 22. Numeric Key Pad
6. SLIDER SWITCH FEATURES
1. OFF NP P Printer Selects Switch
OFF Turn OFF the calculator.
NP (Non-print) Printer is activated only when feed key or non-add/date key is
pressed.
PRINT Printer is activated as long as calculator is turned on.
2.
↓ 5/4 ↑ Rounding Switch
↓ Absolute round down.
5/4 Final result is rounded up if the 1 st digit not to be printed is 5 or more
and rounded down if the 1 st digit not to be printed is 4 or less.
↑ Absolute round up.
3. A 0 2 3 4 F Decimal Point Selector
A Add mode. The decimal point is automatically placed before the last two
digits in addition and subtraction.
0,2,3,4 For multiplication and division, decimal point is set to the result of
calculation. For addition and subtraction, decimal point is set to all
entries. To all the results, number in the decimal place to the last decimal
place designated will be rounded. For example, number at 3
rd decimal
place is rounded at “2” position.
F Automatic floating point for decimally accurate computing. Decimal
point is entered at desired position and the decimal point is
automatically shifted to the right is under 14 digits of integer.
4. Loan Switch
• Memory calculation is on. Loan calculation is off. MT, MS, M-, and M+
keys are activated.
Loan Loan calculation is on. Memory calculation is off. Amount, Interest,
Month, and Payment keys are activated.
5. Grand Total Switch
• Calculation without Grand Total
GT Any total taken with the T key is automatically accumulated to Grand
Total. The accumulated grand total can be recalled by pressing the GT
key.