Victor PL3000 - Manual (Page 9)

9
proceed without clearing the accumulator.
28. [T] Total key
Prints and clears the accumulator. When this key is pressed with the “GT” switch
on, the result is accumulated automatically in the grand total memory.
29. [MT / Amount] Memory Total key / Amount
If the Loan switch is off, MT is activated and if the Loan switch is on,
Amount is activated.
MT: Prints and clears the memory.
Amount: If this key is pressed after a value is entered, it is entered as the Loan
Amount. However, if Interest, Month, and Payment are entered in
prior or modification is done on any of the three as above in prior,
user can calculate / recalculate the Loan Amount by press this key.
30. [MS / Interest] Memory Subtotal key / Interest
If the Loan switch is off, MS is activated and if the Loan switch is on,
Interest is activated.
MS: Prints but do not clear the memory.
Interest: If this key is pressed after a value is entered, it is entered as the Loan
Interest. However, if Amount, Month, and Payment are entered in
prior or modification is done on any of the three as above in prior,
user can calculate / recalculate the Loan Interest by press this key.
31. [M−
/ Month] Memory Minus key / Months
If the Loan switch is off, M- is activated and if the Loan switch is on, the
Month function is activated.
M−: Subtracts an amount from memory. If there is a live calculation pending, the
Memory Minus key will complete the calculation and subtract the amount
from Memory.
Month: If this key is pressed after a value is entered, it is entered as Number of
Months to settle the Loan. If Amount, Interest, and Payment are
entered in prior, or modification is done on any of the three as above
in prior, user can calculate / recalculate the Number of Months by
press this key.
32. [M+
/ Payment] Memory Plus key / Payment
If the Loan switch is off, M+ is activated and if the Loan switch is on, the
Payment function is activated.
M+: Adds an amount to memory. If there is a live calculation pending, the
Memory plus key will complete the calculation and accumulate the result
to Memory.
Payment: If this key is pressed after a value is entered, it is entered as the
Payment. If Amount, Interest, and Months are entered in prior, or
modification is done on any of the three as above in prior, user can
calculate / recalculate the Payment by press this key.