Virgin Mobile MIFI 2200 - Manual (Page 9)

8
LED States
The MiFi Device LEDs provide valuable information about the state of the device and connection
Service Status LED
No Light — Device is powered off.
Green Solid The MiFi Device is powered on and connected
to a mobile broadband network, but is not
transmitting or receiving data.
Slow Blinking The MiFi Device is powered on but there is no
service.
Intermittent Blinking The MiFi Device is transmitting / receiving
mobile broadband data. The blinking rate is
proportional to the data speed.
Power Button LED
No Light — Device is powered off.
Green Solid
Glowing The MiFi Device is powered on and fully
charged.
The MiFi Device is in standby mode (power
saving). Press the power button to wake up the
device.
Red Blinking Battery is critically low.
Amber Solid
Blinking Battery is charging.
Error. [See
Troubleshooting
(page 57)
.]
Caring for Your Device
As with any electronic device, the MiFi 2200 Device must be handled with care to ensure reliable
operation. Novatel Wireless recommends the following handling guidelines:
• Do not apply adhesive labels to the MiFi 2200 Device; they may cause the device to
potentially overheat and they may alter the performance of the antenna system.
• The USB connector cable should plug easily into your computer’s Type A USB port. Forcing
the device into a port may damage the connector.
• Protect the MiFi 2200 Device from liquids, dust, and excessive heat.
• Store the MiFi 2200 Device in a safe place, when not in use.