Viking F20516 - Manual (Page 9)

P
ro
d
u
ct
C
o
n
tr
o
ls
17
P
ro
d
u
ct
C
o
n
tr
o
ls
16
Electronic Timing Center
The Electronic Timing Center is
used to program and control all
timing functions. It has five
display and programming
modes that are activated by the
four push buttons and the
“SET” knob. Both BAKE TIME
and MIN/SEC TIMER can be
used to keep time cooking periods.
Setting the MIN/SEC Timer
The MIN/SEC Timer is designed for accurate timing and is ideal for
baking delicate items such as biscuits, cookies, and popovers, and for
precise broiling. The MIN/SEC Timer can be used at the same time the
BAKE TIME or START TIME functions are in use. It can be used for
timing up to 11 hrs 59 min. When setting the timer, the time displayed
will increase in 1 minute increments. When the timer counts down to 1
minute, the timer alarm will give one beep and the display changes
from hours:minutes to seconds only.
To Program the MIN/SEC Timer
1. Press the “MIN/SEC TIMER” button. The timer will display :00 and
the word TIMER will be displayed in the lower left corner and SET
in the top corner.
2. Turn the “SET” knob until the desired duration time is displayed.
The MIN/SEC Timer is now programmed. The alarm will sound at the
end of the countdown. The program can be canceled anytime by setting
the remaining time to :00. To change back to the time-of-day, press the
“CLOCK” button. Notice that a small clock will be displayed in the
upper right corner to indicate that a program is in progress. The display
will return automatically to the MIN/SEC Timer after a few seconds.
Timer Alarm
At the end of a MIN/SEC Timer program or BAKE TIME program, the
alarm will consist of three beeps followed by two beeps every 10
seconds until the “MIN/SEC TIMER” button is pressed. When a valid
function key is pressed or when a control function starts automatically,
one beep will be sounded. When an invalid function key is pressed,
two beeps will be sounded.
Clocks and Timers Clocks and Timers
SET MIN/SEC
TIMER
BAKE
TIME
START
TIME
CLOCK
SET
Setting The BAKE TIME Program
The BAKE TIME program is used for controlled timing of baked or
roasted foods. At the end of the timed cycle, the oven automatically
turns off. The time in the BAKE TIME mode is displayed in hours
and minutes, with a setting from 1 minute to 11 hours 59 minutes,
increasing in 1-minute increments.
To Set The Bake Time Program:
1. Set the Oven Function Selector to the BAKE or CONVECTION
BAKE position, depending upon the type of baking being used.
2. Set the temperature control knob to the desired temperature and
allow for preheating.
3. Press and release the Bake Time Button. The timer will display :00
with the words SET and COOK in the upper left corner of the digital
display.
4. Turn the “SET” knob until the desired baking time is displayed in
hours and minutes. The word COOK will remain in the display
indicating that the BAKE TIME program has been sent.
Note: The timer will automatically compute a stop time and enter it into
the timer memory. The alarm will sound three beeps followed by two
beeps every 10 seconds until the BAKE TIME button is pressed. The
duration time can be changed anytime during the cooking program by
following steps 4 and 5. Setting the remaining duration time to :00
cancels the BAKE TIME Program. To return the timer to the present time-
of-day, press the CLOCK button. A small clock will appear in the upper
left corner indicating a BAKE TIME program has been set. The timer will
go back to the BAKE TIME automatically after a few seconds.
Setting the Automatic Start Time Bake Program
The BAKE TIME and START TIME modes of the timer can be used to
automatically turn the oven on and off at a preselected time. The
Automatic Time Bake program is ideal for foods with no danger of
spoilage during the time the oven is left off.