Vinotemp VINO2500CD - Manual (Page 8)

- 7 -
• Move the cooling unit towards the mounting sides and push to press the
gaskets.
• Use 2 mounting brackets and 1/4” screws with 7/16” wrench to secure the
cooling unit (see Fig 2.7).
• Attach the exhaust wall grille with screws from the rear side of the cabinet.
• If top exhaust installation, install another top exhaust grille at the top of the
cabinet.
• Plug the cooling unit in the cabinet receptacle.
• Plug the wine cabinet.
Fig. 2.2 REAR EXHAUST CUTOUT
Fig. 2.3 TOP EXHAUST CUTOUT