Vivitar DP-1200 X - Manual (Page 26)

EN-25
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
. English .
User’s Manual
Projector
3.To enter the sub-menu setting, press the MENU button once again.
4.Press the or button to select the sub-menu item.
5.Press the or button to adjust the value of desired sub-menu item.
On the Freeze, Blank and Blank Color sub-menus, press the or button to
select the desired setting.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the or button.
b.To exit from the current menu: toggle the MENU button.
The following table provides detail of the available sub-menu choices:
Sub-Menu Option Description
V-Keystone Adjusts trapezoidal distortion (vertically) of the
picture that may occur depending the projection
angle.
H-Keystone Adjusts trapezoidal distortion (horizontally) of the
picture that may occur depending the projection
angle.
Freeze Freezes the screen.
On Freeze function is active.
Off Freeze function is inactive.
Blank Blanks the screen temporarily.
On Blank function is active.
Off Blank function is inactive.
Blank Color Selects the screen color when Blank is active.
Blue Blanks to blue screen.
Black Blanks to black screen.
Option Menu
This menu includes projector utilities for OSD timeout, OSD position (horizontal &
vertical), projection mode, auto off (On/Off) and lamp life.
Changing settings procedure (using either the Projector Control Panel or the
Remote Controller):
1.Press the MENU button to display OSD menu.
2.Press the or button to select OPTION menu.
3.To enter the sub-menu setting, press the MENU button once again.