Rear view camera – VARTA V-AVD99 User Manual

Page 39

Advertising
background image

V-AVD99

39

After end of communications, press 7 button to hang up and exit from the Bluetooth interface.
When there is an incoming call, it will be shown on display (4), press 5 button to listen or 7 to hang up.
Press 1 button to exit from the Bluetooth interface and return to the main interface.

Note: BAND and MUTE button on the panel can be used as 5 and 7 correspondingly.
Note: When you paired the bluetooth of unit with your bluetooth mobile phone, you can use the A2DP function
to listen the music, after finish of translate the music, the unit is keeping connection with the bluetooth mobile
phone except you disconnect the pairing , then you can still dial or receive calls with the unit.
Note: During TA signal coming, you cannot use the Bluetooth function.

Rear view camera

This unit is equipped with back view camera output. The camera is used to observe the situation behind the
vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the detecting wire for back a
car with the rear gear light. Rear view camera picture will be enabled when you are backing the car.

Advertising