VocoPro DVX-880 Pro - Manual (Page 14)

8
REAR PANEL
1. 5.1 CH. AUDIO OUTPUT jacks - These jacks are for connecting to 5.1 channel ready amplifiers/receivers.
2. COMPONENT VIDEO OUT (Y/Pb/Pr) jacks - These jacks output VIDEO to a TV or monitor via COMPONENT VIDEO
cables. COMPONENT VIDEO outputs the different color signals (Pr/Pb) and luminance signal (Y) separately in order to
achieve high fidelity in reproducing colors. The description of the component video output connectors may differ depending
on the TV set or monitor (e.g. Pr/Pb Y, Cr/Cb/Y, R-Y/B-Y/Y, etc.). Please refer to the operating instructions of the TV
set or monitor for details.
3. VIDEO OUT (RCA) jack - This jack outputs VIDEO to TVs, TFTs and monitors.
4. MIC and MUSIC OUT jacks - These audio output jacks provide analog AUDIO connections to external devices
(A/V receivers, TVs, VCRs etc.). Vocals and music are simultaneously output from these connections.
NOTE: Microphone vocals are only output from the MIC and MUSIC OUT on the rear panel of the DVX-880 PRO.
You will not hear the vocals if you are not outputting from these outputs.
5. COAXIAL OUT jack - This digital output is for connecting devices with a COAXIAL cable.
6. S-VIDEO jack - This jack outputs VIDEO to a display device (TV, TFT, etc.) via an S-VIDEO cable. S-VIDEO provides better
color separation and better resolution by separating the color and picture signals of a composite video signal.
7. OPTICAL OUT jack - This digital out is for connecting devices with an OPTICAL cable. Please make sure to remove
the protective cover from this jack prior to connecting an OPTICAL cable. When not using this input, keep the protective
cover on to protect it from dust and foreign material.
8. SCART OUT - Use this jack for connecting to European TV systems.
9. AC IN terminal - Grounded AC power cable connects here.
Controls and Functions
U S A
SCART OUTPUT
3
5 4 6
2
7
8 9 1