VocoPro DVX-880 Pro - Manual (Page 30)

24
Video Setup page
1. Video Output
NOTE: You can use the V-Mode button on the remote to switch between these video output settings.
S-VIDEO: When using the S-Video output
YUV: When using the Component video (Y, Cb, Cr) outputs
SCART: When using the SCART output
2. TV-Mode
PROGRESSIVE: When using a Progressive Scan TV
INTERLACE: When not using a Progressive Scan TV
3. Color Setting
3.1 Sharpness
Adjust the sharpness level
3.2 Brightness
Adjust the brightness level
3.3 Contrast
Adjust the contrast level
3.4 Gamma
Adjusts the gamma level
3.5 Hue
Adjusts the hue level
3.6 Saturation
Adjusts the saturation level
Setting Up Preferences