Whistler 3300 - Manual (Page 10)

In communities where transmitters are located, the Safety
Warning System displays over 60 text messages. When
Safety Radar is detected the audio alert is geiger counter-
like.
Safety Warning System Text
Example: Poor Road Surface:
Note: Not all areas have Safety Warning System transmitters. Visit
Safety Warning Systems web page at www.safetyradar.com for
SWS locations.
CAUTION
SURFACE
POOR
ROAD
LASER/VG-2 ALERTS SAFETY RADAR ALERTS
Laser Audio/Visual Alerts
When a laser signal is detected the word “Laser” and sig-
nal strength is displayed, the audio alert is continuous for
a minimum of 3 seconds. Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect VG-2.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
Text message confirms detection of VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
(Reference page 23 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
LASER
VG2 VG2
16 17
3300 10/4/00 9:43 AM Page 19