Whistler 3300 - Manual (Page 8)

OPERATION OPERATION
12 13
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Real Voice, Abbreviated
Power Up Sequence test and VG-2 Mode. When selecting
options, Dark (D)=yes, City (C)=no, Quite (Q)=next selec-
tion. Any one of these must be pressed within 20 seconds
or options mode will automatically be exited. To enter:
Press Q:
*Display To Change, Option:
Reads: Reads:
For 2 Seconds CUSTOM D or C Custom Mode
Night Mode
Truck Mode
2nd time TEMP ˚F D = ˚F Changes Temp
C = ˚C Reading
3rd time TONE 3 D or C Tone 1, 2, or 3
(3 different X, K, Ka
patterns)
4th time TEST YES D = YES X, K, Ka Audio tones
C = NO 1 beep during
Power Up
5th time VG2 OFF D = ON Turns VG-2 On
C = OFF Turns VG-2 Off
6th time SAFETY D = ON Turns Safety Radar On
ON C = OFF Turns Safety Radar Off
7th time VOICE D = ON Real Voice On
OFF C = OFF Real Voice Off
8th time TEMP D = YES Temp On
NO C = NO Temp Off
9th time BATT D = YES Battery Voltage
NO On
C = NO Battery Voltage
Off
*Factory settings.
Press P/V anytime to exit.
When Custom is displayed, pressing the Quiet button
again instead of the P/V button allows changing of other
features. If either Dark or City button is pressed it selects
one of two preprogrammed selections, night or truck.
Once night or truck is selected you cannot change other
features in option select mode.
Night = 1. Volume Level 4
2. Auto Quiet On
3. Dark Mode
4. Highway Mode
5. SR On
6. VG2 Off
7. Test Off
8. Voice Off
Truck = 1. Volume level 4
2. VG2 On
3. Test Off
4. Highway Mode
5. SR On
6. Voice Off
3300 10/4/00 9:43 AM Page 15