Winegard RD-4610 - Manual (Page 6)

3 Directional
Handle Extension
4 Directional
Handle
ALIGN POINTER
WITH ANTENNA
TRAVEL POSITION
2 (4) #10 Phillips Flat
Head Screws
FIGURE 4
5 ELEVATING
CRANK HANDLE
(When installed,
extends 2-1/4"
from ceiling).
Snap Handle
into base
when not in use.
CAUTION: After INITIAL
INSTALLATION,
the antenna SHOULD ROTATE
APPROXIMATELY 360
DEGREES FROM TRAVEL
POSITION.
The pointer on the
DIRECTIONAL HANDLE
should point towards the
ROTATION CLAMP when in
TRAVEL POSITION.
Rotation
Clamp
ASSEMBLED VIEW
POINT TO
FRONT OF RV
POINTER
MUST POINT
TO CENTER
OF ROTA-
TION CLAMP
WHEN IN
TRAVEL
POSITION
Tighten screw snugly
Rev 6/05/01
POINT TO
FRONT OF RV
6
1 Ceiling Base