Wasp Bar Code WWS850 - Manual (Page 25)

45
Update
• Field1 Setting
Divide Field by
Field Terminating String
Field Terminating String *
Programming Instructions: (1) Read the label. (2) Program the desired
character string by reading Hexadecimal Digits on page 54. One character
consists of 2 hexadecimal digits. (3) Read the “Validate” label (also on page
54) to complete this setting.
Include Terminating String
Discard Terminating String
Divide Field by Field Length
Field Length *
Programming Instructions: (1) Read the label. (2) Program the desired length
by reading Decimal Digits on page 53. (3) Read the “Validate” label (also on
page 53) to complete this setting.
46
End of Format Programming
• Field2 Setting
Divide Field by
Field Terminating String
Field Terminating String *
Programming Instructions: (1) Read the label. (2) Program the desired character
string by reading Hexadecimal Digits on page54. One character consists of 2
hexadecimal digits. (3) Read the “Validate” label (also on page 54) to complete
this setting.
Include Terminating String
Discard Terminating String
Divide Field by Field Length
Field Length *
Programming Instructions: (1) Read the label. (2) Program the desired length by
reading Decimal Digits on page 53. (3) Read the “Validate” label (also on page
53) to complete this setting.