weber 2200 Series - Manual (Page 3)

3
Step 2
Remove packaged parts
Remove and unpackage warming rack, Weber Warm-Up
Basket, 2 cooking grates, cardboard box (which contains
cookbook and warranty card), 8 short stainless steel
Flavorizer Bars and 5 long stainless steel Flavorizer
Bars.
Note - Be sure no packaging material is left in the
cooking box before reinstalling parts.
Step 1
Removal of all tape
Remove tape from the following locations:
front and rear of side work tables
swing tables
swing table slide bars
bottom tray beneath the cooking box
bottom accessory trays
Assembly
Tools needed
7/8 and 7/16 inch open-end or an adjustable wrench
Supplies needed
You will need a soap and water solution to check for gas
leaks. (See Step "Check for gas leaks.")
Refer to exploded view if replacement parts are needed.
While we give much attention to our products, unfor-
tunately an occasional error may occur. If a part is
missing, do not go back to the store. Call the Weber
Customer Service Center toll free 1-800-446-1071 to
receive immediate assistance. Have your owner’s
manual available for reference.
Figure 1
Figure 2
Warming basket
Weber Warm-Up Basket
Cooking grates
Short Stainless steel
Flavorizer Bars
Long Stainless Steel
Flavorizer Bars