Electric cooktop operation, Cooktop operation, Single element and inner zone – Wolf Cooktop User Manual

Page 10: Initial start-up, Element activation (ct36e/s shown). heat settings

Advertising
background image

Electric Cooktop Operation

10

SINGLE ELEMENT AND INNER ZONE

To activate a heating element, touch the OFF ON touch

pad that corresponds to the element you wish to use. The

power bar indicator will begin to blink and show a half-

power status.

To complete the activation, touch one of the following

symbols or touch pads of the element control while the

power bar indicator is still blinking:

Touch the

+

or

symbol to set the heat setting at

half-power output and complete the activation.

Touch HIGH to set the element at the highest heat

setting and complete the activation.

Touch SIM or MELT to set the element at the lowest

heat setting and complete the activation.

To change the heat setting—the element is activated and

the power bar indicator remains steadily lit:

Touch the

+

or

symbol to change the heat setting

incrementally up or down.

Touch HIGH to increase the setting directly to the

highest heat.

Touch SIM or MELT to decrease the setting directly to

the lowest heat.

Touch OFF ON to turn the element off.

Cooktop Operation

INITIAL START-UP

Before using your electric cooktop for the first time, clean

the glass-ceramic surface as recommended in the

cleaning section on page 15. The cooktop surface must

be free of any foreign substances, especially those that

could melt and permanently adhere to the glass-ceramic

surface.

When the cooktop is powered up for the first time it will

default to lock mode. To unlock the control panel, touch

and hold the key symbol for 3 seconds.

IMPORTANT NOTE:

A small amount of smoke and odor

may be noticed during the initial break-in period.

O

SIM

HIG

H

OF

F O

N

OF

F O

N

SIM

HIG

H

ZON

E 2

OF

F

ON

ME

LT

HIG

H

OF

F O

N

BR

IDG

E

SIM

HIG

H

ZON

E 2

ZON

E 3

OF

F O

N

HIG

H

SIM

CL

EA

R

Element activation (CT36E/S
shown).

Heat settings.

O

SIM

HIG

H

OF

F O

N

OF

F O

N

SIM

HIG

H

ZON

E 2

OF

F

ON

ME

LT

HIG

H

OF

F O

N

BR

IDG

E

SIM

HIG

H

ZON

E 2

ZON

E 3

OF

F O

N

HIG

H

SIM

CL

EA

R

OFF ON

TOUCH PAD

+

AND

SYMBOLS

SIM

TOUCH PAD

HIGH

TOUCH PAD

Advertising
This manual is related to the following products: