Whistler GPS - Manual (Page 22)

System Settings
Some common settings that can be accessed from any
page are; Backlighting, Navigation Mode, NMEA Output,
Map Direction and Units (Miles vs. Kilometers) See 20-A.
Most of the settings affect the Map Page.
Backlight allows you to change the time the background
lighting remains on.
Navigation Mode allows you to select Normal, Saving or
Simulate mode. Saving mode allows the unit to still search
for satellites but not as often, thus saving battery life. This
setting is not recommended for difficult terrain or in city
areas where satellite reception may be weak.
NMEA Output allows the Galileo ™ to communicate to
NMEA 0183 ready devices. See page 33 for NMEA information.
Map Direction switches the map page orientation from
North being the direction heading or Track. Track relates
to either a shortcut (GoTo) or waypoint location. When
Track is selected a small Icon in the top left of the screen
points in the direction of North.
Units switch between US and Metric measurements.
Change a Setting
1. Press the MENU Button.
2. Select “Settings”.
3. Move the Direction Button to the setting you wish to
change and press the OK Button.
4. Move the Direction Button to the desired selection and
press the OK Button.
5. Select another setting or select to exit and save
changed settings.
System
Settings
Change A
Setting
GALILEO ™ GPS
20
System Settings
20-A
Set Page
Settings
Set Page
Light
Set Page
Navigation
Set Page
Measurements
Set Page
Directions
Set Page
Units