Weider 9300 PRO - Manual (Page 8)

8
10
8
FRAME ASSEMBL
Y
26
20
1
4
3
20
20
40 40
2
55
55
89
89
25
9
23
24
23
8. Press a Weight Tube Bumper (26) into each
Weight Tube (25).
Insert a Weight Tube (25) into each stack of
Weights (89). Be sure that the pins on the
Weight Tubes are in the pin grooves in the
upper Weights.
9. Lubricate the insides of the holes in the Top
Weights (24) as shown. Slide a Top Weight
onto each set of Weight Guides (23).
10. Attach the Top Frame (2) to the Ab Upright (1)
with two 5/16Ó x 2 3/4Ó Bolts (55), two 5/16Ó
Washers (20), and two 5/16Ó Nylon Locknuts
(40). Do not tighten the Nylon Locknuts
yet.
Attach the Butterfly Frame (3) to the Press
Upright (4) with two 5/16Ó x 2 3/4Ó Bolts (55),
two 5/16Ó Washers (20), and two 5/16Ó Nylon
Locknuts (40). Do not tighten the Nylon
Locknuts yet.
Lubricate
Lubricate