weber 42372 - Manual (Page 10)

10
REINSTALL CONTROL PANEL
Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the
cooking box.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten
screws.
Reinstall burner control knobs & igniter wires (if necessary).
Place corresponding control knobs down onto the valve stems. From the underside of the
control panel, replace the two wires (1, 2) of each igniter.
(1)
(2)
1 = Grounding Wire
2 = Solid Red Wire
3 = Green Tab with Black Wire
4 = White Tab with Black Wire
5 = Yellow Tab with Black Wire
6 = Blue Tab with Black Wire
- +
5
- +
6 4
2
3
1
1 = Solid Blue Wire
2 = White Tab with Black Wire
3 = Yellow Tab with Black Wire
4 = Blue Tab with Black Wire
- +
- +
2
3
4
1
D4 D6
GAS INSTRUCTIONS