weber 42372 - Manual (Page 7)

7 7
ƽ
WARNING: The gas connections of your Summit ®
gas grill have been factory tested. We do however
recommend that you leak check all gas connections
before operating your Summit
® gas grill.
REMOVE CONTROL PANEL
Part required: Phillips Screwdriver.
Remove the burner control knobs (1). The screws (2) need to be removed
from the control panel (3) before the control panel is removed from the grill.
Put your fi ngers under the front edge of the control panel and lift off.
Completely remove the control panel (4) from the cooking box assembly
exposing the valves, burners, igniter, and manifold.
(1)
(2)
(3)
(1)
(2)
(3)
D4
D6
(2)
(4)
D4
D6
(2)
(4)
GAS INSTRUCTIONS