Winegard TRAVELNET TN2300-DV User Manual

Page 4

Advertising
background image

Ver. 1.6

8/3/2009

- 4 -

1.

Dial your phone number.

2.

Follow the voice prompts to retrieve your messages.


Clearing Your Voicemail Indicator
• The message light on your TN2300-DV SERIES will flash when you have a new
voicemail message. The indicator should clear after you have listened to all of
your new messages. If your voicemail message indicator does not clear (or if you

just want to clear it manually), press

.


Making a Three-Way Call
Your TN2300-DV SERIES supports three-way calling, if it is supported by your
service provider.

To make a three-way call:
1.

Place or answer a call on your phone.

2.

Once you have established the connection with the first caller, press Flash,

enter the second number you wish to call, then press Flash again. (This puts the
first caller on hold and dials the second number.)

3.

When you’re connected to the second party, press Flash again to begin your

three-way call. If one of the people you called hangs up during your call, you and
the remaining caller stay connected. If you initiated the call and are the first to
hang up, all three callers are disconnected.

Using Call Forwarding
Call Forwarding lets you forward all your incoming calls to another phone
number. You can continue to make calls from your phone when Call Forwarding
is activated. To activate call forwarding, contact your service provider for
instructions.

Note:

Certain cellular systems may use a different method to connect three-way

calls. Please contact your service provider for more information.

# * 1 0 5 #

Adjusting Your Phone’s Settings

Volume Level
If the volume level on your phone’s receiver is too high or too low during a call,
you can adjust the levels using the telephone keypad.

To increase the phone’s volume level:

• Press

.

To decrease the phone’s volume level:

• Press

.


Entering Configuration Mode

Advertising