Winegard TRAVELNET TN2300-DV - Manual (Page 8)

Ver. 1.6
8/3/2009 - 8 -
To disable Dial Tone After Remote Disconnect:
• From Configuration Mode, press .
Note: If Dial Tone After Remote Disconnect is disabled, additional remote
disconnect options may be available. See “Disconnect Tone” on page 33 for
more information.
# * 8 * 0 #
Hotline
The Hotline feature allows you to program the TN2300-DV SERIES to
automatically dial a specific phone number after a selected timeout delay
whenever you take the phone off-hook.
To program the Hotline phone number:
• From Configuration Mode, press <phone #>
, where
<phone #> is the phone number you want to dial automatically.
To enable the Hotline feature:
• From Configuration Mode, press
<1 - 8> ,
where <1 - 8> equals the selected timeout delay, in seconds.
(For example, if you wanted the phone to wait five seconds before dialing the
hotline number, you would press from configuration mode.)
To disable the Hotline feature (default setting):
• From Configuration Mode, press .
One-Minute Alert
You can keep track of your in-call duration by configuring your TN2300-DV
SERIES to sound a short beep at one-minute intervals during active calls.
To enable One-Minute Alerts:
• From Configuration Mode, press
To disable One-Minute Alerts (default):
• From Configuration Mode, press
TTY Use
ATTY device (also known as a TDD or Text Telephone) is a telecommunications
device that allows people who are deaf, hard of hearing, or who have speech or
language disabilities to communicate by telephone. Your TN2300-DV SERIES is
compatible with select TTY devices. Please check with the manufacturer of your
TTY device to ensure that it supports digital wireless transmission.
To establish TTY service, contact your cellular service provider.