Western Telematic IPS-800CE-D16 - Manual (Page 9)

2-1
2. Unit Description
As shown in Figure 2.1 and Figure 2.2, the IPS back panel includes connectors,
LEDs and manual controls described below:
BUS
A
B
A-1 A-2 A-3 A-4 B-5 B-6 B-7 B-8
MAIN POWER COM
10BaseT
ACT RDY ON DEF
1
2 3 4 5 6 7
8 9
Figure 2.1: IPS-800CE-D16 Back Panel (8-Plug Unit)
➀ Bus "A" Power Inlet and Circuit Breaker: An IEC320-C20 AC inlet
and a 16 Amp Circuit Breaker which supply power to the Circuit "A"
outlets. Also includes cable keeper (not shown.)
➁ Bus "B" Power Inlet and Circuit Breaker: An IEC320-C20 AC inlet
and 16 Amp Circuit Breaker which supply power to the Circuit "B"
outlets. Also includes cable keeper (not shown.)
➂ Bus "A" Switched Outlets and Indicator Lights: AC Outlets that can
be switched On, Off or rebooted in response to user commands.
• IPS-800CE-D16: Four (4) IEC320-C13 Outlets with indicator lights.
16 Amps total load per circuit; 10 Amps load per outlet.
• IPS-1600CE-D16: Eight (8) IEC320-C13 Outlets with indicator
lights. 16 Amps total load per circuit; 10 Amps load per outlet.
BUS
A
BUS
B
A-1 A-2 A-3 A-4 A-5 A-6 A-7 A-8
B-9 B-10 B-11 B-12 B-13 B-14 B-15 B-16
MAIN POWER
COM
10BaseT
ACT RDY ON DEF
1
2
3
4 5 6 7
8 9
Figure 2.2: IPS-1600CE-D16 Back Panel (16-Plug Unit)