BenQ-Siemens M81 - Manual (Page 116)

115 Settings
right page (115) of EF81 FUG en, A31008-H2640-A1-3-7619 (27.04.2006, 13:51)
© Sie
m
ens AG 20
03, \
\Itl.eu
\c
ot
tbus\
Proj
ekte_30\
Ben
Q
_M
obi
le\
EF81
_KESTR
EL_1
\out-
Template:
X75,
Version 2
.2;
VAR La
ngu
age: en; VAR
issue d
ate
: 06
0317
Divert other call types
All calls / Data / Fax / Messages
Select a call type and
confirm with
C
.
§Options§ Open menu and select Set .
J Enter the number you
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
Check status
b
§Options§ Open menu and select
Check status .
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Clear all
b
§Options§ Open menu and select
Clear all .
All set diversions are cleared.
Confirm with
C
.
All calls
b
All calls are diverted.
Ç Symbol in the top line of
the display in standby
mode.
Unanswered
b
A call is diverted in the following sit-
uations: Not reachable , No reply , Busy
(see below).
Not reachable
b
A call is diverted if the phone is
switched off or is out of range.
No reply
b
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
b
A call is diverted if another call is in
progress. If you activated Call waiting
(page 114), you will hear the call
waiting tone during a call (page 35).
Fax
b
Fax calls are diverted to a number
with a fax connection.
Data/Messages
b
Data calls are diverted to a number
with a PC connection.
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Reactivate divert: The last divert has been
stored. Proceed as with "Set divert". The
stored number is displayed. Confirm
number.