BenQ-Siemens M81 - Manual (Page 37)

Calling 36
© Siemens AG 20
03, \
\Itl.eu
\c
ot
tbus\
Proj
ekte_30\
Ben
Q
_M
obi
le\
EF81
_KESTR
EL_1
\out-
left page (36) of EF81 FUG en, A31008-H2640-A1-3-7619 (27.04.2006, 13:51)
Template:
X75,
Version 2
.2;
VAR La
ngu
age: en; VAR
issue d
ate
: 06
0317
Accepting the waiting call in addition to
the first
Ý
Accept the waiting call.
Depending on your settings
(page 116) you can also accept the
waiting call by simply opening the
clamshell.
If the clamshell is closed, press
‡
to swap between the calls.
Or (if the clamshell is open)
§Swap§ / A Accept the waiting call.
The current call is put on hold.
To swap between the two calls when
two connections are established,
always press A .
Rejecting the waiting call
µ
Press.
Or (if the clamshell is open)
§Reject§ Press.
Accepting the waiting call, ending the
current call
(Only if the clamshell is open)
B
End the current call.
C
Accept the new call.
Ending calls
Clamshell closed
µ Press. You return to the
held call.
Clamshell open
B
Press the End key briefly.
Or
§Options§ Open menu and
select Drop .
After the Return to held call? display,
you have the following options:
§Yes§ You accept the held call.
§No§ You end the held call.
Conference
b
(Not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be
enabled specially.
You cannot establish a conference when
the clamshell is closed.
When closing the clamshell you can con-
tinue an ongoing conference if you are in
handsfree mode (page 31).