Wolfgang Puck IBC1000 - Manual (Page 3)

5
Assembly and Use of
H Haanndd B Blleennddeerr Attachment
1. Ensure the motor base is unplugged.
Attach hand blender attachment to
motor base by lining up the two separate
parts. Turn clockwise to lock in place.
2. Place food in suitable container for mixing
(beaker, bowl, pan). For best results, solid foods
should be no larger than 1/4" or 1/2” cubes.
3. Plug into 120-volt 60 Hz AC only outlet.
4. Place the hand blender attachment into
your ingredients. Turn the speed selector
to LO first. Press the ON/OFF switch to
begin blending; then gradually increase speed, as needed.
Slowly move the blade up, down and sideways through the food .
Note: Never lift the hand blender attachment out of your ingre-
dients while the unit is running.
This unit is equipped with a safety off feature. Once you
stop the blender/chopper, you must press the ON/OFF
switch twice in order to restart.
5. Do not operate the motor continuously for more than one
minute when using hand blender attachment. Allow it to
cool off for 3 minutes before next use.
6. When you are finished, simply release the ON/OFF
switch, unplug the motor base, and then unscrew the hand
blender attachment.
Blending Guide
Speed Use
Min Mixing gravies or sauces.
Medium Blending puddings or pancake mix.
Max
Baby food, eggs, frozen juice concentrate, milk
shakes and powdered diet mixes.
Know Your Immersion Blender/Chopper
4
1. Motor base
2. ON/OFF switch
3. Speed selector
4. Mixing beaker
5. Hand blender attachment
6. Bowl cover
7. Chopping blade
8. Blade shaft
9. Chopper bowl
3
5
6
2
1
4
7
9
8