Feature descriptions, Installation – Whistler 1710 User Manual

Page 3

Advertising
background image

Whistler’s ergonomic and user-friendly design
provides a new level of operating convenience. Special
features include:
Note: Not all units have all features listed.
1. Bracket Release Button – Provides quick

and easy release of the mounting bracket.

2. Speaker

– Provides distinct audio warnings

for X, K, Ka band radar, safety radar, laser and
VG-2.

3. Mounting Bracket Location – Slot holds

mounting bracket firmly.

4. Radar Antenna – Compact, high-efficiency

antenna receives radar signals.

5. Front Laser Antenna – High gain optical

lens provides increased sensitivity and field
of view for leading-edge laser detection.

6. Rear Laser Antenna – An integrated optical

waveguide provides superior detection of
laser signals transmitted from behind.

7. City Button - Reduces the annoyance of

false alerts typically encountered in urban
driving areas.

8. Quiet/Menu Button - Pressing QUIET

before a signal is detected engages Auto
Quiet Mode which automatically reduces
the audio level after the initial warning to a
low audio level setting. Pressing QUIET
during a radar/laser encounter silences
audio alerts, while allowing visual alerts to
keep you informed. Pressing and holding for
2 seconds allows you to select VG-2 on/off. 1733 &
1734 only (see page 15).

9. Power / Volume Control – Turns unit on/off

and adjusts audio level.
Power/Dim Dark (1734 Only) - Turns unit
on/off and engages Dim/Dark modes press and
hold for 2 seconds).

10. Volume Up/Down Buttons – Adjust volume up or

down.

FEATURE DESCRIPTIONS

11. Icon Display - offers easy-to-read display to

indicate power, city mode, radar band
idetification, and signal strength.

11a. LED Display - multiple indicator lights help

you determine the radar source and your
distance from it.

11b. 7 Segment Icon Display (1734 only) -

combines icon display with a 7 segment digital
display that shows signal strength indication
and band identification.

12. VG-2/Laser Indicator – Shows the unit is

receiving VG-2 or laser signals.

13. X-band Indicator - Shows the unit is

receiving an X-band signal.

14. K-band Indicator - shows the unit is

receiving a K-band signal.

15. Ka-band Indicator - Shows the unit is

receiving a Ka-band signal.

16. H - Unit is in Highway mode.
17. C - City Indicator - Shows that the unit is

operating in city mode.

18. Signal Strength Indicator - Shows the

strength of the signal being detected.

19. Power On Indicator - shows that the unit is

receiving power.

20. K/Ka-band Indicator - Shows the unit is

receiving a K or Ka band signal. K/Ka
indicator will flash for Ka band.

21. V- Shows that the unit is receiving a VG-2

signal.

22. VG-2 Button (1730/1732 Only)- Engages

VG-2 detection mode.

• Total Band Protection™ - Complete Band
Coverage that detects laser, radar, VG-2 and safety
radar bands.

FEATURE DESCRIPTIONS

5

6

Mounting Guidelines

• Mount the unit as low as possible near the center of

the windshield.

• Do not mount your unit behind wipers,

ornaments, mirrored sunscreens, etc. These
obstructions have metal surfaces which can affect
radar and laser signals and reduce critical
warning time.

(Regular tinted glass does not affect

reception.)

• Some windshields have an Instaclear

or

Electriclear

type coating, which affect radar

signals. Consult your dealer or the owner’s
manual supplied with yourvehicle to determine if
your windshield has this coating.

• Avoid placing unit in direct contact with wind

shield.

• To reduce the possibility of theft, conceal your

unit when not in use.

Windshield Mounting

• Install the two suction cups and rubber bumper

onto the bracket by fitting them into their holes.

• Press the suction cups onto the windshield at the

location you have chosen.

IMPORTANT: Some newer cars have a plastic

safety coating on the inside of the windshield. The

windshield bracket may leave permanent marks on

this type of surface. To find out if your vehicle has this

type of windshield, check the owner’s manual or ask

your dealer. We recommend that you do not leave

the suction cup bracket on the window in direct

sunlight. If the detector is removed, this may cause

blistering of the dash in some vehicles.

INSTALLATION

7

Advertising
This manual is related to the following products: