Waves Guitar Tone Processor GTR Solo - Manual (Page 28)

Waves GTR Solo User Guide 28
H I C UT rolls off high frequencies.
Range: 0.1 to 7
Default: 7
S TEREO controls the position of the delay regenerations
within the stereo field. (0 = Mono, 100 = Full Stereo “ping
pong” effect)
Range: 0 to 10
Default: 10
S PRING
M IX controls the balance between Wet and Dry signal.
Range: 0 to 100
Default: 50
T
IME controls the reverb decay time.
Range: 0.2 to 10 seconds
Default: 3.6
P
REDELAY controls the delay between the start of the direct
signal and the reverb.
Range: 20 to 170ms
Default: 20ms
G ATE /C OMP
G ATE controls the sensitivity of the gate.
Range: inf to 0dB (FS)
Default: -60
C
OMP controls the amount of compression applied to the
signal.
Range: 0 to 100
Default: 50