Waves Guitar Tone Processor GTR Solo - Manual (Page 4)

Waves GTR Solo User Guide 4
Chapter 1 – Introduction
1.1 Welcome
Thank you for choosing Waves! In order to get the most out of your Waves
processor, please take the time to read through this manual.
In conjunction, we also suggest that you become familiar with
www.wavesupport.net . There you will find an extensive Answer Base , the latest
Tech Specs , detailed Installation guides, new Software Updates , and current
information on Registration and Authorization .
By signing up at
www.wavesupport.net , you will receive personalized information
on your registered products, reminders when updates are available, and
information on your authorization status.
1.1 Product Overview
Waves GTR Solo is a guitar tone processor featuring virtual guitar amps, cabs,
and effects. It can run as a DAW plug-in or as a standalone application for
processing live input. This means you can connect your guitar to a laptop
computer and use it live on stage, using a MIDI foot controller for real-time preset
selection and sound manipulation.
GTR Solo can run up to 4 Stomps and 1 Amp at any given time, as well as the
Tuner.
• The Stomp page allows editing of the Stomps chain and the placement of
the Amp within the processing chain.
• The Amp page allows editing of the Amp settings as well as the cabinets
and microphones used in the setup.
• The Tuner offers chromatic, standard, custom, and alternate guitar
tunings.
• The Presets page displays the list of presets in the current preset file and
allows auditioning and editing of presets and their order.