Wolf Grill Module ICBIG15 User Manual

Page 10

Advertising
background image

10

W O L F

G R I L L M O D U L E

U S E & C A R E

G R I L L M O D U L E

O P E R A T I O N

B E F O R E U S I N G F O R T H E F I R S T T I M E

Wash the grilling grate, grease deflection
plates and grease collection pan in warm
soapy water. This removes any residual oil and
grease left on the surface from the manufactur-
ing process. The electric grill module must be
reassembled in the correct alignment as shown
on page 9.

Refer to Care Recommendations on page 15.
Apply a stainless steel polish to protect the
finish and add luster.

Allow a burn-in period of approximately 10
minutes before use. During the initial period of
use, you may smell a light burning odor or see
light smoke. Both these conditions are normal
with a new grill module.

C O N T R O L

O P E R A T I O N

The Wolf electric grill module operates by
automatically cycling the heating elements
between zero power and full power. As the
heat is increased on the control panel, the
element will stay at full power for longer
periods and have shorter periods of zero
power.

M O D E S

O F O P E R A T I O N

L O C K M O D E

In Lock mode, all touch pad operations on
the control panel are disabled and the heating
element is deenergized. A steady glowing light
in the

touch pad indicates that the unit

is locked. Refer to the illustration below for
location of the

touch pad.

To lock the control panel, touch and hold
the

symbol for 3 seconds. The unit

will beep three times and the light in the

touch pad will illuminate. The

control unit is now in Lock mode.

To unlock the control panel, touch and hold
the

symbol for 3 seconds. The unit

will beep twice and the light in the
touch pad will go out. The control unit is
now in Idle mode.

IMPORTANT NOTE: When the unit is powered
up for the first time or if there has been a
power outage, the grill module will default to
Lock mode.

I D L E M O D E

After unlocking the control panel as described
in Lock Mode, the unit enters the Idle mode of
operation. The valid touch pad operations are

,

, ”+” or ”” and the Lock mode

.

LED display

indicator lights

Lock ”key”

touch pad

Power indicator

bar graph

SELECT

touch pad

Temperature

adjustment

OFF ON

touch pad

Timer LED

display

CLEAR

touch pad

Touch control panel

Advertising