Wolf Grill Module ICBIG15 - Manual (Page 13)

13
To change the power level setting of the
elements individually, touch the
touch pad to select either the front or rear
element.
When the indicator light is
illuminated, adjustments can be made to
the power level of the front element.
When the indicator light is illumi-
nated, adjustments can be made to the
power level of the rear element.
The settings can be adjusted using the
and
touch pads or the “+” and “–”
symbols.
Once individual power levels are set, the
and indicator lights will illuminate
alternately. To change an individual setting,
either wait until the desired indicator light is
illuminated or touch the
touch pad to
select either the front or rear element.
W O L F G R I L L M O D U L E U S E & C A R E
To change individual power level settings
to the same setting, touch the
touch pad until the
indicator light is
illuminated.
Enter any power level setting within five
seconds and both elements will be set to
that power level.
If only one element is energized and no
other setting is entered, both elements will
be set to the power level of that element.
If after five seconds no power level is
entered, both elements will be set to the
lower of the two power level settings.
To turn an element off individually, touch the
touch pad to select the element, then
touch within 5 seconds. If the
touch pad is touched after 5 seconds, the entire
unit will turn off.
To turn both elements off, touch the
touch pad until the
indicator light is
illuminated, then touch the touch pad
within 5 seconds to turn off both elements.