Whistler 1790SE - Manual (Page 10)

OPERATION OPERATION
16
Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Compass Select, Abbreviated
Power Up Sequence and VG-2 Mode. When selecting
options, the , or must be pressed within 20 seconds
or options mode will automatically be exited. To enter:
Press : *Display To Change, Option:
(Quiet) Reads: Press
For 2 seconds COMBO or Combo=Radar & Compass
Radar=No Compass
Compass=No Radar
2nd time TONE 3 = YES Tone 1, 2, or 3
= NO (3 different X, K, Ka
patterns)
3rd time TEST YES = ON X, K, Ka Audio tones
= OFF 1 beep during
Power Up
4th time VG2 OFF = ON Turns VG-2 On
= OFF Turns VG-2 Off
5th time SAFETY = ON Turns Safety Radar On
ON
= OFF Turns Safety Radar Off
6th time VOICE = ON Real Voice engaged
ON
= OFF Real Voice disengaged
7th time B SVR = ON Battery Saver On
ON = OFF Battery Saver Off
8th time X = ON X Band On
Yes = OFF X Band Off
9th time K = ON K Band On
Yes = OFF K Band Off
10th time Ka = ON Ka Band On
Yes = OFF Ka Band Off
11th time Laser = ON Laser On
Yes = OFF Laser Off
*Factory settings.
Press anytime to exit.
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
• Press City and (Quiet) simultaneously and release.
Display reads:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
• Press (Power/Play) to exit.
Memo Mode
Record up to nine distinct message tracks for a total of 90
seconds, one 90 second message or any combination in
between.
IMPORTANT: Unit does not detect radar or laser signals
during recording or while playing a memo.
WARNING!!! Memo mode is not intended to be used
while you are driving. You should not use any device in a
vehicle that may distract you from observing the road
ahead.
To record or play a message (Memo mode):
• Press memo button and release. The unit will beep once;
this enters Memo mode. Display reads:
17