Sea t assembl y – Weider WESY16010 User Manual
Page 14
14
27. Press 3/4” Round Inner Caps (34) into the
ends of both Pad Tubes (28).
Insert one Pad Tube (28) into the Seat Frame
(36). Slide a Foam Pad (30) onto each end of
the Pad Tube.
Insert the other Pad Tube (28) into the Leg
Lever (29). Slide a Foam Pad (30) onto each
end of the Pad Tube.
28. Make sure that all parts have been properly tightened. The use of all remaining parts will be explained
in ADJUSTMENT, beginning on page 15 of this manual.
Before using the home gym, pull each cable a few times to make sure that the cables move smoothly
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPOR-
TANT: If the cables are not properly routed, they may be damaged when heavy weight is used.
See the CABLE DIAGRAM on page 19 of this manual for proper cable routing. If there is any
slack in the cables, you will need to remove it by tightening the cables. See TROUBLE-SHOOT-
ING AND MAINTENANCE on page 18.
27
30
34
28
34
29
30
36
SEA
T ASSEMBL
Y