Weider WESY16010 User Manual
Page 25
Advertising
This chart is provided to help you identify the small parts used in assembly. Important: Some parts may
have been pre-assembled for shipping purposes; if you cannot find a part in the parts bags, check to
see if it has been pre-assembled.
REMOVE THIS PART IDENTIFICATION
CHART FROM THE MANUAL!
Note: Assembly is divided into four stages: 1) frame assembly, 2) press and butterfly arm assem-
bly, 3) cable and pulley assembly, and 4) seat and backrest assembly. The hardware for each
stage is packaged separately. Wait until you begin each assembly stage to open that parts bag.
WESY16010 R0801A
Advertising