Wizcom Quicktionary 2 Professional - Manual (Page 7)

The Quicktionary
7
The Quicktionary
Use the Quicktionary application to scan and translate
text in various languages. Hear scanned text read aloud
from either the Split Screen or the Dictionary Screen.
The Quicktionary opens automatically when turning the
Pen on.
You will reach the Input Screen and the red light at the
tip of the Pen will flash. Scan into any screen as long as
the red light is flashing. Scanning is disabled when
accessing menus.
The Quicktionary Screens
The Quicktionary application has three main screens,
the Input Screen, the Split Screen and the Dictionary
Screen. Each screen displays the translation of the
selected words. You can scan into any screen when the
red light at the Pen tip is blinking. Text on screen will be
over-written by the newly scanned text.
The Input Screen
This is the screen that appears when you enter the
Quicktionary application. Scan text directly into this
screen. The "Scan in..." message indicates the source
language of the selected dictionary and the highlighted
section shows the input field.
ƒ After scanning, text is displayed in the Split Screen
or the Dictionary Screen.
ƒ Insert text using the Character bar or Opticard. See
Editing and Inserting Text on page 12 for more
information on these options. After inserting text,