Operating instructions – Wind Crest CTI365D User Manual

Page 4

Advertising
background image

Page# 4 of 16 11069.00 Rev A

OPERATING INSTRUCTIONS

BEFORE USING THE COOKTOP FOR THE FIRST TIME:

 Be sure all packing materials, labels or tape are removed from the cooktop surface.

 Wipe with a clean, damp sponge and dry.

 Apply a Glass Ceramic Cleaning Crème. Buff with a clean cloth. (See CARE AND

CLEANING INSTRUCTIONS for glass top.)

Precautions to observe to preserve the cooktop appearance.

 Regular use of the Cooktop Cleaning Crème on the glass surface will protect the surface

and make it easier to remove food soil and water spots.

 The glass surface is resistant to impact but not unbreakable if a pan or other object is

dropped on it with sufficient force.

 Do not use aluminum foil directly on the glass, it can melt and damage the glass.

 Do not allow plastic to come in contact with a hot glass surface. They can melt or burn

and damage the glass surface.

 Do not allow pans to boil dry. This can damage the pan, element and/or the cooktop.

 Do not use the glass surface as a cutting board.

 Do not slide utensils across cooking surface. This may cause scratching. Utensils with

rough surfaces should be avoided since they can scratch the glass surface.


 Do not use griddle plates that bridge two or more elements (cooking zones). This can

damage the cooktop elements.

Signal Lights

 POWER ON LIGHT (See Fig – 1)

The power on light will glow when one or more elements are turned on. The light is

located above each Turn-On touch pad.

 POWER SETTING WINDOW (See Fig -1)

The number “0” appears and blinks when power is turned on.
The power level setting appears when selected.
Power levels are: L,1,2,3,4,5,6,7,8,9,H
NOTE: The power level selected will blink if a pan is not in place on the burner, and the

unit will turn off after 30 seconds if a pan is not in place on the burner.


 SURFACE HOT LIGHT (See Fig – 1)

The light is located above the MED-Quick Select touch pad
The glass surface will be heated due to contact with the hot pan.
This light glows when the glass surface reaches a temperature that will feel warm or hot.

Advertising