Worth Data RF Terminal 7000 - Manual (Page 66)

Data passed:basename, channel, terminal
Event:
A four-line terminal has signed in on channel at client basename. Terminal ID is passed
in terminal.
OnTermSignOut
Data passed:basename, channel, terminal
Event:
A terminal has signed out on channel at client basename. Terminal ID is passed in
terminal.
OnTermData
Data passed:basename, channel, terminal, data
Event:
A terminal on channel at client basename has sent data in response to an
Input
method
call.
OnTermNotSignedIn
Data passed:basename, channel, terminal
Event:
A command has been sent to a terminal that is not signed in.
OnTermSequenceError
Data passed:basename, channel, terminal
Event:
The one-for-one host prompt/terminal response protocol has been violated. The host cannot
send a second
Input
command until it has received a response from the first
Input
command. If
a base station receives 5 sequence errors in a row, a Host Logic error is generated and the base
shuts itself down.
While PromptNET/ActiveX will intercept and prevent most logic errors, they
are still possible so you should implement this event handler!
OnTermIllegalCommand
Data passed:basename, channel, terminal
Event:
An illegal command has been sent to a terminal.
PromptNET/ActiveX is designed to prevent illegal commands but we may not
have imagined all the ways in which our customers will want to use it!
OnTermUpArrow
Data passed:basename, channel, terminal
Event:
The up-arrow button has been pressed on a terminal. You must issue another
Input
method call before WDIPterm can respond to another keypress on this terminal.
OnTermDownArrow
Data passed:basename, channel, terminal
Event:
The down-arrow button has been pressed on a terminal. You must issue another Input
method call before WDIPterm can respond to another keypress on this terminal.
OnTermLeftArrow
Data passed:basename, channel, terminal
Event:
The left-arrow button has been pressed on a terminal. You must issue another Input
method call before WDIPterm can respond to another keypress on this terminal.
OnTermRightArrow
Data passed:basename, channel, terminal
Event:
The right-arrow button has been pressed on a terminal. You must issue another Input
method call before WDIPterm can respond to another keypress on this terminal.
OnTermBeginKey