Walker MW 15 HP - Manual (Page 8)

Specifications
4
MODEL MW
TRANSMISSION (continued)
Transmission Fluid
Factory Service 20W50 Multi-Viscosity Motor Oil
Transmission Fluid Capacity 79 fl. oz. (2336 ml.)
Transmission Cooling Cooling Fan Mounted on Drive Pulley
Ground Travel Speed
Forward m.p.h. (km/h)
Reverse m.p.h. (km/h) 0-5 (0-8) Infinitely Variable
0-2 (0-3) Infinitely Variable
BLADE DRIVE
PTO Shaft Quick Disconnect Splined Shaft with Two (2) High-Speed U-Joints
Blade Spindle Each Blade (2) Mounts Direct on Peerless Right Angle
Gearbox with Tee Gearbox in Center Connected to PTO Shaft
(Complete Geared Drive, Peerless Model 1000 Gearboxes)
Blade Drive Clutch and Brake Manual Belt Tightener Clutch and Band Brake
(Stops Blades within Five (5) Seconds of Disengagement)
Max. Blade Speed
[25 in. (64 cm) Blade] @ 3600
RPM Engine 2400 RPM
[15700 FPM (4785 m/min)]
(48" Deck)
TIRE SIZE
Deck Caster Wheel 2.80/2.50-4 Pneumatic (4-Ply)
Deck Caster Wheel (Optional) 8.25 x 2.75 Foamed Rubber
Drive 18 x 8.50-10 (Low-Profile)
Rear 2.80/2.50-4 Pneumatic (4-Ply)
Rear Wheel (Optional) 8.25 x 2.75 Foamed Rubber
TIRE PRESSURE
Deck Caster Wheel 20 PSI (137 kPa)
Drive 15 PSI (103 kPa)
Rear
20 PSI (137 kPa)
DIMENSIONS (Tractor and Mower)
Length 80 in. (203 cm)
Width 48-3/4 in. (124 cm)
Height 44-3/4 in. (114 cm)
Wheel Base (Tractor) 22 in. (56 cm)
Tread Width (Tractor) 29-1/4 in. (74 cm)