Whistler 1670LD - Manual (Page 12)

In communities where transmitters are located, the Safety
Wa rning System alerts you with 60 voice messages.
When Safety Radar is detected the audio alert is geiger
counter-like.
Example:
Note: Not all areas have Safety Warning System ™ transmitters.
Visit the Safety Wa rning System ™ web page at
www.safetyradar.com for SWS locations.
LASER/VG-2 ALERTS SAFETY RADAR ALERTS
Laser Audio/Visual Alerts
When a laser signal is detected V/L and signal strength is
displayed, the audio alert is continuous for a minimum of 3
seconds. Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect the VG-2 Gun.
When a VG-2 signal is detected, the detector “hides” its own
radiated signal and becomes undetectable by the VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
(Reference page 27 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
20 21
Blinking
1670LD manual 4/11/02 11:48 AM Page 23