Maintenance and troubleshooting – Weslo MOMENTUM WLEL7397.1 User Manual

Page 10

Advertising
background image

10

4. Measure your heart rate, if desired.

If there are

sheets of

clear plastic

on the metal

contacts of

the handgrip

pulse sensor,

peel off the

plastic. Place

your hands on

the handgrip

pulse sensor,

with your palms on the contacts. Avoid moving

your hands. When your pulse is detected, your

heart rate will be shown.

For the most accurate heart rate reading, continue

to hold the handgrips for about 30 seconds.

If your heart rate is not shown, make sure that your

hands are positioned as described. Avoid moving

your hands excessively or squeezing the metal

contacts too tightly. For optimal performance, peri-

odically clean the metal contacts using a soft cloth;

never use alcohol, abrasives, or chemicals to

clean the contacts.

5. When you are finished exercising, the console

will turn off automatically.

If the pedals do not move for a few seconds, the

console displays will pause.

The console has an “auto-off” feature. If the pedals

do not move and the console buttons are not

pressed for a few minutes, the power will turn off

automatically to save the batteries.

Contacts

Inspect and tighten all parts of the elliptical exerciser

regularly. Replace any worn parts immediately.

To clean the elliptical exerciser, use a damp cloth and

a small amount of mild soap. IMPORTANT: To avoid

damage to the console, keep liquids away from

the console and keep the console out of direct

sunlight.

BATTERY REPLACEMENT

If the console displays become dim, the batteries

should be replaced; most console problems are the

result of low batteries. See assembly step 4 on page 6

for replacement instructions.

HANDGRIP PULSE SENSOR TROUBLESHOOTING

If the handgrip pulse sensor does not function proper-

ly, see step 4 above.

MAINTENANCE AND TROUBLESHOOTING

Advertising