White Rodgers 1F97W-71 - Manual (Page 22)

22
different time periods for each day separately
(for example, heating/cooling period 1 on Mon-
day may begin at 5:00 AM, but heating/cooling
period 1 on Saturday may begin at 9:00 AM).
Use the following table to plan your program
time periods, and the temperatures you want
during each period. You may also want to look
at the sample program table to get an idea of
how the thermostat can be programmed.
ENTERING YOUR PROGRAM
Follow these steps to enter the heating/cooling
program you have selected.
We recommend that you remove the thermostat
from the wall for programming (especially for enter-
ing cooling programming). Fresh "AA" Energizer
®
alkaline batteries must be installed to perform off-
wall programming. BE SURE SYSTEM SWITCH IS
SET TO OFF POSITION BEFORE REATTACH-
ING THERMOSTAT TO SUBBASE!
You cannot program the thermostat with the SYS-
TEM SWITCH in the AUTO position.
Set Current Time and Day
1. Press SET
CLOCK
once. The display will show
minutes only.
EXAMPLE:
2. Press and hold either TIME
FWD
or TIME
BACK
until you
reach the correct minutes.
NOTE
NOTE