White Rodgers 1F97W-71 - Manual (Page 32)

32
day's programming, go back to the program-
ming instructions to correct the error.
6. Press RUN
PRGM
.
7. Press SYSTEM
HEAT-OFF-COOL-AUTO
until COOL is displayed.
8. Repeat steps 2 through 5 to check cooling
temperatures.
9. Press RUN
PRGM
to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY
PROGRAMMED AND READY TO AUTOMATI-
CALLY PROVIDE MAXIMUM COMFORT AND
EFFICIENCY!
When you have completed programming, you may
set option switch group A (see TOTAL KEYPAD
LOCKOUT in the OPERATING FEATURES sec-
tion).
Press SYSTEM
HEAT-OFF-COOL-AUTO
until OFF is displayed. Reattach
thermostat to subbase. Turn on power to the
system. Then press SYSTEM
HEAT-OFF-COOL-AUTO
to select the opera-
tion mode you want (HEAT, COOL, AUTO). Press
FAN
ON – AUTO
until FAN AUTO is displayed (automatic
cycling).
NOTE